brackets hold hoses in place
Re: Re: Power steering hose routing... -- Corbin Johnson	Post Reply	Top of thread	Maverick Message Board

Posted by: wm 01/24/2002, 21:24:30

There is a bracket that bolts on with the frame stand that is designed to hold the hoses in place. It bolts on the front of the drivers side frame stand using the two bolts that hold the stand on. There is a second bracket that bolt to the first one which holds the hoses in place. Corbin's picture shows the loop that the two brackets form and the hoses pass through that loop! Nice pic Corbin

Post Reply | Alert

Original message Top of thread Return to the MMB

Replies to this message

Thanks Corbin, that was the pic I was referring to. n/m --- Anthony C. 71 comet ( 01/25/2002, 09:28:04 ) ( 3 bytes )