Posted by: Inshan
01/25/2002, 22:52:09
|
If you are using the existing C4 trans in your car (can't remember if you are), this flexplate won't work. You'll need to get the 157 tooth one, the 164 tooth one is too big and won't fit inside the C4 bellhousing. A good place to check for the flexplate is the classifieds at www.corral.net, there's usually people selling them there ever so often. I just completed this swap over the past few months. You can email me at inshan@excite.com if you have more questions.
:=Hi, I am putting a 5.0 in my Mav, as most of you already know from my previous posts, and I was wondering if this flexplate will work. It says it will, but I want to be sure. Check out the link below. Thanks
:=- Corbin Johnson
**********************************************************
It has the correct balance but you must have the c-4 with 11 7/16" converter bolt circle (dipstick in the pan).
|
