Posted by: Threemav
12/16/2001, 10:00:37
|
Ok, next crack open the line at the rear junction block. Under pressure, does fluid come out? If not, work your way back to the master cylinder thru the pressure differential block to find the blockage. If the master cylinder is quite old it may be gunked up and spreading it around. Or take the rear line ( front port on the master) apart at the master and the lines at the rear wheels and blow it all out with compressed air. The distribution block could be stuck off center and cutting off the fluid to the rear line also.
Good luckI checked the distribution block and seems thats where the problem is at... The line to the rear is cut off 3 in down and crimped over its self, and the line under the car is cut off beside the tranny. Im still confused why it had fluid in the rear brakes though. glad i havent taken this thing on the road yet
|
