Posted by: Mavaholic
02/27/2002, 20:24:29
|
The only difference is the inboard passenger rail, if it came from a cat car. But it is easy to modify. I went the other way and put early bucket rails in a 77. I had to cut a pie shaped wedge out of the center of the rail (vertically) to get them to line up. The easy way to do it is to bolt the 2 outside rails and drivers inside rail down. Then stretch a string between the outside rails, one at the front seat frame mounting hole & 1 at the rear seat frame mounting hole. You will have to shim the line up to clear the trans hump. You can then set the passenger inner rail in place and see exactly how high to modify it. Also be aware that 4 door buckets are different than 2 door. You can put 2 door buckets in a 4 door but not the other way around. 4 door buckets will not fold foward to allow access to the back seat.
|
