Posted by: Mavaholic
03/05/2002, 05:45:43
|
What is the shifter from and what parts do you already have? If you have just the shifter assembly (Mustang?) and it mounts to the floor, all you would need is a piece of linkage which could be fabricated from you existing column linkage. The shift arm comming out of the trans needs to be flipped 180 degrees for this to work. If its an aftermarket shifter, most use a cable and parts can probably be obtained from the manufacture if they are still in business. A little more details please and maby we can be more specific.
|
