Re: Disc Brake Conversion Help!  
Re: Disc Brake Conversion Help! -- Corbin Johnson Post Reply Top of thread Maverick Message Board
Posted by: hoop
12/23/2001, 19:31:54

 Hi,
I am starting to switch my Maverick to power disc brakes and I took all my drum stuff off already. I was wondering how to keep the "bolt"-like things on the outer tie rods and lower a-arms still (not turning). Before I took the spindles off they were really tight in the holes, but now that I have the spindles off and waiting to put the other ones on, how will I keep the "bolts" from turning when I am trying to tighten the nut? I tryed putting my old spindle back on, but I can't get it tight enought to stop the "bolt" from turning. How can I keep this from happening? Thanks for any information. This has happened to others as well, right? Merry Christmas, and I hope everyone has a happy holiday season. Thanks again.

- Corbin Johnson


Hey corbin put a jack under them and put pressure against them remember that you'll have to get the newer outer tie rod ends because they changed in 75 to different ones. Hoop


Post Reply | Alert Original message Top of thread Return to the MMB