Got the call from the body shop. Car is gonna need rear quarters. I knew one side would, but I had hoped not two. He gets his quarters from a place called Sherwin's (sp), or something like that. He told me if I can find some place else he would order from there, or I could bring in my own. Any suggestions other then the usual? Pics of where my money is going
No they dont, but their isnt more then a few inches that dont have a bondo filled hole around the entire well. At some points the bondo is over an inch thick. A couple other spots are thin enough to poke a pencil thru. They gave me the option of patching and welding. But hours wise they said it would be about the same as putting on a quarter, if not more.
I dont know. I did see that rockauto did have a Sherman part # and were $100 cheaper the AutoKrafters. Not sure if they were the same size.
I picked mine up off ebay cheap. My understanding is no matter who you get them from there is one supplier. I'll dig up the place I got mine from and post it.
Here it is. I bought them from Jim at American Muscle Car Parts. Paid less than $500 shipped to my work address. They came from Schotts Metal Products who I have read on here are the only ones that make them. There are two links in my post that lead me to where to buy. http://www.mmb.maverick.to/showpost.php?p=642760&postcount=1
i think 'sherman' is the company's name, they produce lots of sheet metal for all kinds of cars. just like rick i got my panels from jim at american muscle car parts as well - very recommendable!
Only one company makes them....and everybody else sells them. Look all over ebay.....tons of them on there. There is a place in Greeenville, OH that sells them for $199 per side.
I have a pair I might not need. My car goes into the shop end of this week and I bought them just in case. First glance guy said mine are fine and we shouldn't need the pair I have. I will know more soon. PM if interested.
