Just watching the sunset
You can see where it used to touch the cam now it seems ok and i put the 2in spacer on too there's no stall converter i think the stock gears for...
They are both different there's a inch difference on the sides the 2dr seat is wider. I know first hand in my 74
Yes
I have and this is what happens only two passes !!!!! :dance: 8 cop cars later
Here's a pic
Took the mav to Lancaster speedway for a shake down it was spitting and sputtering like it was losing fuel the fastest time i ran was 925 71mph i...
So what size carb should I be running on my 306 cid c4 trans edelbrock performer rpm long tube headers e303 cam
Finally im driving the mav got alinement new tires rims oil change strut rod bushings sway bar bushings stabilizer pins traction bars rotor swap...
I hear you but once you rebuild one it so simple you'll say to your self why didn't I do this a long time ago
3G 3G 3G 3G 3G 3G :) and your problems are solved! ! My voltage regulator use to get so hot it would take the paint on the inter fender off !!!...
Swap it out for a 3G alt so easy to do i put a 130amp on my 306 never drops
I put a flexlite fan and 2in spacer the fan shroud is for a 67-70 mustang it was 65.00 off eBay new i cut on the side in middle took out about...
Here's another mag
Yellow wire go's to the battery wire on the alt green/red stripe go's where you have it i just did the swap i put in a 130 amp .no problems all...
I put a asi i got off eBay i used 68 mustang boss 302 upper and lower hoses i trimmed like 1/8 off the strut bar cross member on each side
There's a guy on ebay that makes them for ower cars
1-74 2dr. 306
I put a 71-73 mustang booster and master using the same brake pedal
Separate names with a comma.