Something I forgot to mention was that I gently massaged the rad support forward about an inch.
....looks way different than my fan. Are you sure it's from a V6 Taurus?
Just a good clean up and a rattle can makeover
Taurus fan installation.
When I built my 84Cougar with an 88 HO engine, I used a March pulley set for that HO. The stock OEM pulleys that I removed are what you see on the...
I have a 3 row with the Taurus fan mounted up side down. I gently masaged the mounting holes on the rad cradle forward about an inch ( not for the...
[ATTACH] If you don't have PS, keep it simple.This was before the 3G upgrade.
Finished up the front brakes today . Flushed the tank and put fresh 94 in. Replaced the elect fuel pump(had a new one in stock for another...
It's a good thing we have forum rules re language..lol. I planed about an hr to change the M/C out for preventive maintaince since the past 4...
If you go 8.8, make sure you get the correct configuration for you car. By this I mean ,check if the rear has a centered pinion or if it's off-set...
Go 9". As far as the driveshaft goes, switch the yoke to a short one and it's a bolt in. My 9 " is from a Torino so I had custom wheels made. I...
Thanks for the renewal notice. Money sent! (y)
Has anyone asked what kind of coin are we talking here? IF you are serious, do the front half for $2500-3000 and your options are endless. Like...
Smoke is good....screech draws Cops. If you want both.....add HP!
It was a Ford part # D2......... It was listed as a OEM rad for a 72 Comet with A/C. That rad is 40+ years old and still works fine.
I have a 3 row A/C rad with a trimmed Taurus fan and still have enough room.
Thanks.
It's good to see the success this is generating. Can someone please educate me on this " family/friends" thing on paypal? Is there a surcharge or...
Done! Merry Christmas to everyone and their friends and family. Thanks Stefan for this opportunity to help. Mark
I drained the gas from the brass float, blew it out with air, flushed it with brake cleaner, blew it out again and coated the float with this....
Separate names with a comma.