Any one know where I may be able to find the molded hose from control valve to heater core ? Thanks for any info
Yes there is a prebent hose. As far as I know...it is no longer available. I went to the auto parts and looked thru all their hoses to find one that would work. Here is the hose I found (and used on my car): NAPA 11049 It is a heater hose for the 2000 Chevy Malibu/Olds Cutlass with the 3.1L V-6. On my notes it says "Heater to Pipe #1" I recall I had to cut it down some, and rotate it on one end by a 1/4 turn.
Would this one work? It is for a 69/70 Mustang. http://www.summitracing.com/parts/sdk-6918472cvac?seid=srese1&gclid=COaEjaDk98wCFQsDaQodJBEG1Q
Thanks Craig I'll give that a try. Thanks jasonwthompson I did see those and I may have to research them a little more. My thinking is if it was close to fitting then it would have a listing- fits Maverick- but what do I know. Thanks again everbody