Rear of car too high

I want to lower the rear of my car by a couple of inches. I have a new set of springs on it, but it sits taller than I want it to. Any suggestions? Thanks!

 

The search button is your friend!

http://mmb.maverick.to/showthread.php?t=73183

Cheap and easy!

 

If these are brand new springs remember that they need a little time for them to "settle", can take a couple months for this to happen.
If it were me I'd use some lowering blocks..............maybe 2".
Here is an article that shows how to install them.

http://www.sytyarchives.com/howto/viewarticle.php?article_name=lowering_blocks.php&dir=suspension

 

Also make sure you tightened the bolts with the vehicle on the ground. NOt with the wheels hanging.

 

Darren is 100% correct, this goes for anytype of rear suspension piece, springs, swaybars, panhard bars................etc.

 

I wouldn't use lowering blocks http://www.eatonsprings.com/blocks.htm
You could remove 2nd or 3rd leaf and see what happens

 

Whatever you do, make sure to let the new springs settle first............