Separate names with a comma.
I would like to switch from 1 3/4 inch brakes to 2 inch brakes, Can I use my current backing plates? What drums with the correct center hole....
Very nice ! Where can I get those style indicators ? RLB
I have a Scat kit in my race car. Started with a 69 351 Winsor block. 4.030 bore and 3.875 stroke for a 391 cu in . I have put over 150 runs on...
I used a chain for 20 years or so, til I fabed up a chrome moly tube with left and right threaded heim joints. Looks better, but does the same job.
I have seen a T style Canton pan on a Mav. All the guy did was notch the back of the sump on either side. I used the Boss 302 copy (also Canton)
I do no. What happens if there is to much flo? RLB
Where can I get a new clutch pedal rubber stop. The little round button on the pedal mount. Looked in Krafters and Melvins, but I might have...
I like the Milodon #16113. Fits 1970-78, aluminum, high volume, Summit, $72. I have two in service at this time. RLB
Thanks for the info Maxx and have a good season with your program. RLB
First of all its not a Maverick. Its a 64 Fairlane race only . Back half, big tires, cage etc. 390 inch Winsor, c4 brake. Weighs 3000+. 12 to 1...
Thanks Rick for the post. I have heard all good about switching. 110 leaded race gas sells locally for around $12 a gallon. What conversion kit...
Anyone on the Forum using E85 in their race only car? I plan to switch from gas this spring. I want to do the carb modification myself. I can only...
Do you make a lower repair section for the two door body door's? RLB
Did any of the numbers change 60 ' 330' 1/8 1/4 ? You could check a couple springs and if they are down some add a shim. Look for a broken spring....
Do you shift off the light or the tach ? RLB
Can you email me at rlbriggs7212@gmail.com thanks RLB
Let me verify the ratios and I will get back to you. RLB
mav man you are 100% When I did that we were running 12.40's. with a mild 302. No way would I try that with a Dart block 347 and a shot. But for...
In 1984 I did the same thing. 9" narrowed to Maverick width, stock 28 spline axle's, mini spool 4.56 gears. 9x30 M&H tires. Raced it like that for...
I have a used set I no longer use. I's fine for a foot break application. I would not use it with a trans break. I used it for years before I...
