http://www.rieckesbaysidegallery.com/programfiles/talers/m5.JPG Drivers side view
http://www.rieckesbaysidegallery.com/programfiles/talers/m2.JPG Here is the passenger side view
Ive never seen what the stock Maverick manifolds look like, any one got any pictures of em???? Chad
Hi Craig. They are pretty thickwalled on the sides, mostly, it was removing the casted lip along the sides, and right at #2cyl, and #6cyl, there...
Stockhatch, Mine is a floor shift. I did it cause I have more time than money these days. LOL! it did not take me long to cut em down,, bout a day...
Yes. Both manifolds are off the 88 t-bird i took the engine from. ChadS
Well, I did it! I got the cast iron manifolds to clear on my 69.5 with the 88 roller 5.0! I have a CNC mill, so I set them up in the mill, and I...
I got a set of headers today, they are used on the 65-67 mustangs, They are block hugger, long tube headers. Yeah, I had to put a dent or 3 in em...
Yeah, it sounds good! Ill hook up the A/C eventually,, The car originally had AC so it wont be hard. Id say the power steering pump is more of the...
Photo of my 69.5 with a 5.0 http://www.rieckesbaysidegallery.com/programfiles/talers/69maverick2.JPG Here is a photo of my 69.5 maverick, with...
Lookin good!!!!! Thank you kindly! I wondered if I could notch the front frame to set the radiator lower,, My radiator is 30 inches wide, tank to...
Rick, What are the measurements for the 90 Mustang radiator? I can fit the 88 t-bird radiator between, but its too tall for the hood to close. Its...
I got the 88 roller 5.0 in the 69.5 Maverick! Bolted down. Been thinking of belt pulleys alot these days,,, and how to convert it from a...
I see what your saying.... There is many reasons why engines overheat,,, Sometimes radiators dont flow as good as they should,,, What cam do you...
Im more of a holley man myself,,, But, passionate towards Quadrajet carbs,,, I know that sounds strange,, but hey,, I just like em. When they work...
I was thinking the accelerator pumps were adjustable on these carbs,,,, The linkage that hooks up to the plunger has different holes to control...
They are just stock manifolds of the 88 t-bird 5.0,,, I milled the sides down flat where the ribs used to be. Made good clearence! Ill put some...
I know many use the headers,,, but I made a set of cast irons work, and have good clearence all the way around! The manifolds I used were off a 88...
Ok, The clear lenses are a little cloudy, but they are not broken. Email me if you wish, at ChadS3@hotmail.com and we can talk bout em. Chad
I was gonna do a AOD in my 69.5,,, The AOD is wider at the valve body and pan, The bellhousing is bigger so tight clearence on the exhaust. If you...
Separate names with a comma.
