Believe it or not I had a oil pump lock up or air lock on me on a fresh 68 302. We tried starting car 2 or 3 times and it would crank real hard...
Great advise Jean. With you 100%. My wife doesn't really like all the time and money I spend on my cars but she also knows how happy it makes me....
Mav1970 All the steel I bought was 4 feet of 2" x 3" Mild steel and 8 feet of 2 " x 2" Mild steel. What I also did was I bought a 3rd engine...
Good tip Thomas I will be sure to check that out. Thanks
Dave I have done the swap. You will have to drill 4 new holes for the new booster so that everything lines up and space it from the firewall....
I measured mine and they are 26.5" inside and 31.25 outside and 3.5 height.
I just bought JC Witney 4 leaf springs for $125.00 worked for me. Even got free shipping. Got them in 7-8 days
Jamie the wheel guy down the road from me told me he could polish my wheels and clear powder coat them for around 60.00 each. then all the...
If the outlet only has 3 terminals it only requires two hot & the ground the neutral is not used. If it has 4 terminals then you use all four. If...
I only live about 10 miles from Eastwood and I go there on Saturday mornings fairly often. I was there 2 different occasions and seen them...
Jean I can't help you out with that but if you need another set. I have an extra if your interested (Black) The ones I have are for a 1972. I am...
What will you be using the car for: Street, Strip, Road Racing, Trailor Queen?????
Maxx that is a great rotisserie, puts mine to shame but for the price of the steel in that rotisserie you could buy one already done including the...
Dave I have about 11 inches to the floor of clearance from the quarter panel on its side. I can spin 360 degrees without hitting anything. the car...
Tom I was scared to DEATH. But now I just sling it around without a worry.
I have had no problems without the center bar. If I were to put them on castors them i would have tied the two together. Total cost was $40.00 For...
Well scooper if you took the bumpers off and drained the fluids in the car and built each stand to hold 2500-3000 lbs each it might...
I know how everyone likes pictures so here is my homemade rotisserie. The thing is just great, it saves so much time and not to mention saving my...
JMO I would cut out around the real bad area's then media blast all around the cut out to remove as much rust as possible then weld in your patch...
They should be sued for false advertising. I was looking forward to a real article. What a jip
Separate names with a comma.
