Here.This is for a 4 spd.swap,but the same basic princaples apply.http://mmb.maverick.to/showthread.php?t=8113 Digging back into the vault a...
Not hard at all to do,if you have all the correct parts.You have the standard trans,but do you have the correct bellhousing,flywheel,the clutch...
Keep the 200 in there,and enjoy it for what it is.Inthe meantime start doing upgrades to the rest of the car,front disc,a better 5 lug rear...
Monte Carlo bar will help with front chassis flex,and stiffin up the front end.
Looks great!Lots of hard work and great detail. :2thumbs: The bonding between you and your dad.....PRICELESS! Great Job!!
Then your going to need a trans,or at the very least a bellhousing.V8 frame stands/mounts,re-do or lengthen some wiring,throttle cable will...
Where are You located?
nahh it is!
I have a nice tranny cooler.pm me your address,and I'll send it to you.:tiphat:
I have mine in etch primer sitting in the rafters as my 69.5 mav is down to a bare shell for the winter.No dents or bondo,and straight.
Are you still considering making them?
Believe me,if I had a grand,I wouldn't be attempting to do what I'm thinking about doing.The heads I'll be using are far from stock.
I know this subject has been beaten to death,but...a while ago there was a discussion about the gt40p heads and sparkplug/header issues.In this...
It's an aftermarket pan that came with a 1 pc.rubber gasket.I had trouble years ago with a chrome 302 front sump aftermarket pan.NO amount of...
I'd blame it on the help :whistle:
Guess I should have phrased that a little different.lol They are hard,but nothing like the top brands.Check here,this might help....
How old are the timing chain and gears?Chain could have stretched and jumped a tooth.Is the distributor tight?Check the hold down bolt.Also what...
Titan is a brand sold by most of the autoparts chains,and is way much softer material than the top brands. Get a narrow cold chisel and a...
I'm leaning towards that the crank snout is worn beyond stock and will need sleeved,or a new crank all-together.
Yes,the crank is orig.to the block.It's a pretty stout engine,and never leaked before.He installed a trans and the front seal was bad,replaced...
Separate names with a comma.
