Thought this was a good discussion of drum/drum, drum/disk, and disk/disk MCs. http://www.mpbrakes.com/technical-suppo ... inders.cfm I know...
I had this problem. Was a bad flexplate. It was the correct part number but the balance was off and it shook like crazy. Shake from misfire...
AFter restoringa '68 Beetle for a car-related charity, I decided I needed a restored classic for myself. Wanted something different. Looked at a...
According to fordsix.com, the 250 and 302 have different imbalance. http://www.fordsix.com/250swap.php IIRC, the 250 has a zero imbalance.
I replaced the bottom part of both rear quarters and made the seam just below the body line around the wheel wells. I think I used about a 6"...
If I were to do it again, I'd buy a kit. Unless you find a donor with good, usable parts, I suggest you do the price comparison. Also, if the...
I had an HEI dist on a 5.0 in the Maverick. Worked fine but due to the comments here I carried a spare HEI that I picked up on ebay for $40....
Jim is a fine and generous man. He also gave me some parts -- wouldn't take anything. At the 2011 NPD show Jim was passing out rolls of micro...
The transmission support cross member is welded up. Here's the criginal crossmember that goes between the frame ralis. (Was pretty rusty before it...
I added a leaf to my sagging original 3-leafs and liked the result. Four new leafs might have been too stiff for me.
If I had a hoist, I'd also have a tall transmission jack and pull the transmission and engine separately. Wouldn't need to cut up the unibody.
Pull them together but be prepared to stand it on end to clear the radiator support. I use a floor jack with the handle pointed to the rear of...
Thanks, Ken. Everett, the transmission controller only works with a computer controlled transmission like an AODE or 4R70W. All these...
Signed it. I hope it can be saved. Jim
Too Cold to Work Temp was in the low 20s this morning so there won't be any work on the F100 till this afternoon, if at all. Too bad, 'cause...
http://www.youtube.com/embed/POXqGsgAtaY
Copper radiator? Maybe looking to scrap it. If the scum will cut up a good AC system for a little copper I guess they'd steal a radiator.
Best was 8.2XX in the 1/8th which, according to the calculators, should put it just into the 12s in the 1/4 mile. We were looking for a cool day...
That's better!!
Will you be running street tires at the strip? I have 347 with 350-400 FWHP, Broader Perf C4, original 3.00 8" rear with ebay Traction Loc....
Separate names with a comma.
