Jimmy, I'll take a medium and pick it up on Sunday! See you there!
And three shots from the track!
More photos More photos from the show!
Jimmy, that was an amazing turnout! You and Bev did an excellent job of putting this all together :bowdown: It really gave a chance for everyone...
Sorry guys and gals! I had to make a parts run up to Squamish on Saturday and didn't get back into the Lower Mainland until 10pm. Sunday was...
Problem solved, it was the regulator that was bad that was causing the drain. Spare regulator #2 is the one that worked. As we can see then the...
This was one of my first suspects but I wanted to eliminate the easy and cheap stuff first before getting to the more labour intensive and...
None of our stores here have that kind of testing equipment. All they want to do is sell it to you and then tough crap if it isn't the part you...
All the regulators that I have tested are of the electronic style including dad's original one that was in the Bird. The only older mechanical...
Well, I hate electrical, always have. This is actually on my dad's '67 Bird but is the same set-up as our cars. The battery will drain in a day of...
Or a cracked head or maybe even a block:yikes:, possibly a leaking intake gasket. Either way it sounds as if you'll have to take the head off....
You can make one out of the two but better off just go out and get a used one with a good buckle and transfer over all the guts, that way you...
The 302 is a thin wall casting. DO NOT BORE OVER .030!!! If you do you risk the possibility of boring into a water jacket or getting too thin and...
:biglaugh: :biglaugh: :biglaugh: Wow, they look like there in pretty rough shape. I'd be tackling them pretty quick if planning on saving the...
You're on the right track Jamie, besides, the Moroso aluminum line will cost way more and for what. The steel line with the fittings is the way to...
Double check that flexplate and make sure it is the same diameter as the old one along with the depth from the mounting ring. Also check the...
Ok, distributor. Pull out number one spark plug, plug the hole with your thumb or finger and slowly crank the engine over just until your thumb...
Check the bellhousing, is it correct for the flexplate you are using? This exact thing happened to me when I did a swap in my T-bird from a V6 to...
Double check your ground connection first, only shorting out under heavier load. If all is good there I would run the power wire direct to the...
Separate names with a comma.
