Hey thanks alot. It was a poor conection on the black wire to the dis.... aground wire I think. I also apreciate the advice that I should...
I still need help I hooked the duraspark back up but have no spark at the coil. I must have done something. My car is 10 miles away and I just...
i didn't read everything but a guy that used to work for adeco or whatever has a shop in florida called sanner performance and he made me a nice...
so if you use the white wire do you use the duraspar modulator too?
my car is a 73 that used to have a 250 in it now I have an 89 302 in it. I added the duraspark myself.
I'm running a 78 distributor duraspark. the harness comming from the distributor has orange purple and black. Thanks for the information.
white wire hook up should I not use the green and violet magnetic triger hook up and use the white wire hook up instead? If I do that is the old...
I hooked-up my MSD today using the wiring diagram on the back. I unhooked the old modulator and this is how it went...The orange wire to pos...
I need upper control arms springs perches ball joints and idler arm.....Are there other car that interchang. I want the best parts for the best...
beef it up there are all kinds of choices....for 2k you can pick up a rack n' pininion steering system from total performance....tubular control...
Have you thought about a larger cam? I'll trade you my 2.79 gears for 3.0 or higher. Ideal 3.25 but 3.55's are cool too...for this trade.
I put a new mastercylinder in today and I noticed when bleeding the brakes that the fluid from the right rear and front left came out with less...
yup Get this I unhooked the heater core for about 4days...no noise. I hooked it back up and you still couldn't hear it. I drove 8 miles home...
I... I disconnected the heater core and just looped it back to the motor. The noise is bearly there but it's there at around 2000rpms. the...
I have a whine noise that I thought was the transmission, as it changes pich with shifts...automatic. Well I took it to the trans shop and they...
This thing is cast into the back of each of my heads. How does one block this off the right way? How does one do this easily inside the engine...
well the motor only has 4000 miles on it so far after the overhaul....it only had 40k on it before that. The result is the same without the air...
I failed inspecton yesterday.... My CO was too high...running too rich. There is also a bad miss that is worse at higher RPM's and my timming...
how about 6th street area? go there. Maybe Lamar is a good drag
I'm in the same boat :)
Separate names with a comma.
