Houston we have a Wheel/tire clearance problem

Well i just put on my new keystone wheels and noticed i have literally 1 mm of clearance between the tire and traction bars.... no big deal, ill just keep them off the car. Well the leaf springs are also 1 mm away from the tires. Anyone see a problem with this?

 

It won't be a problem, unless you drive the car....

 

Yeah, i plan on letting it sit for a couple years

 

How far is that in inches? They didn't teach the metric system when I was in school

 

1 millimeter = 0.0393700787 inches

 

If my math is right...that is just over 1/16"...less than 5/64"...less than thickness of 3 quarters stacked on top of each other.

 

What?

Is this a yes or a no?

 

You'll definitely want to put the white lettering on the outside

What is the rim width and back spacing and the tire size? Maybe a spacer can get you straight.

 

That's why they make wheel spacers.

 

Your math is wrong...

 

You're answering a question with a question. I asked you How far is one mm in inches? Is it between 1/16"-5/64"? If the answer is yes...then it is not enough room and the tire will rub.

 

1mm is just under 1/25" ... it's practically touching at rest ... it ain't gonna work like that

 

Ok a 1/4 of an inch is more realistic.

 

You already know the answer to your question , you didn't tell us if you have any clearance on the fenderwells if so then just get some spacers like suggested

Since Frankee's not around much anymore we have to pick on you now j/k

 

Well, i was worried

Dont want my tire popping going down the freeway at 50 mph