Posted by: Threemav
12/15/2001, 17:21:08
|
:=i finaly rebuilt my 9 in brakes, new springs/dpads/drums, and the frount ones bled fine, but the back wont drip a drop of brake fluid and the pedals firm.
.........................................
Remove the bleeding screws and clean out the holes in the screws. If no fluid comes out of the cylinders, you need to replace the wheel cylinders, there blocked with sludge. The screws have a small hole on the bevel surface that connects to the hollow center.
:=
forogt to mention the wheele cylinders were replaced also
|
