Re: 1969 1/2 Maverick brakes
Re: 1969 1/2 Maverick brakes -- Ed	Post Reply	Top of thread	Maverick Message Board

Posted by: Ken Merring 01/28/2002, 19:10:53

My 1969 1/2 Maverick has a pull to the right when applying the brakes. Have installed new upper ball joints to rid EXTREME pull and dip and have not yet had new allignment. The car sat for 3 years and has only 24K original miles. Had similar problem with a Pontiac recently and was fixed by replacing both front brake hoses. Have been trying to locate new hoses but no listing for this year or 1970. From what I've read on web sites, 1969 1/2 had Falcon front end parts but according to pictures, the hoses don't look alike. I don't have access to a Hollander Interchange manual for compatability reference. Anyone have an experience with this problem? ......................... Welcome to the exclusive list of owners who have a hard time getting hoses for your year. The part # should be D0DZ-2078C-D for mfg date to 1/2/70. Part #D0DZ-2078E-F for mfg date after 1/2/70. You may try this website www.greensautoparts.com get there 800 tel. and give the part # or they will make you call again, a toll number to have it looked up. There may be others that have a source. Good luck, Ken

Post Reply | Alert

Original message Top of thread Return to the MMB

Replies to this message

You could also have a bad wheel cylinder inside one of the drums. --- Anthony C. 71 comet ( 01/29/2002, 09:27:32 ) ( 719 bytes ) +1 Re: You could also have a bad wheel cylinder inside one of the drums. --- Ken Merring ( 01/29/2002, 19:36:56 ) ( 975 bytes ) +1 All i have is a Year One catalog . --- Anthony C. 71 comet ( 01/30/2002, 08:38:02 ) ( 606 bytes )