The 250 pan is wider than the 200/170 pan if I remember right .
Wow thats a very nice looking 4 door , I realy like the rear dash !
Looks great I hope my interior turns out that good !
I found them lines but they didn`t look like they would work with my oil gauge. I though there might be a line with the correct fitting. I gess...
I know I`ve seen it before and I want it but I can`t find it nowhere :banghead: . Any help would be greatly appreciated.
I believe they are 1/2 corse thread
The chain will work just fine , I`ve been running the same timing chain for years with no problems. The only bad thing is I think the factory dual...
Do you have a holley or edelbrock carb ? If you have an eldelbrock carb you will need to mess with the secondary linkage a little to get it open...
Sorry to hear about the car but a least you guys are okay !
Will I be able to run the stock valve springs with them cams ?
I haven`t bought nothing for it yet so the idea of a 351 is still rattling around in my head but if I don`t find one soon for cheap I`ll have to...
I got the engine tore down the other day , found out it is not a roller motor but it did have a roller timing chain . I thought that all the 5.0...
What is a "p" head is it any better than the `85 heads ?
If I can find a cheap 351 with a roller cam I might go with that but I have no need to stroke it to a 408 . What year exploders had the gt40 heads...
Hey guys , The 302 in my `85 econoline is starting to get real week on me and it never was much fore pulling alot of weight on the highway . I...
You lost some of you`r low end torque but you should have more mid range now . I don`t know if you`l gain any real power with the K&N but it could...
Wow , I hope my 4 door lookes that clean once its done !:thumbsup:
Thanks for the help , I`ll give it a try once I get moved into my new shop. No more carport for me :yahoo: .
A motorcraft 2 barrel for a 302 (a little under 300 cfm) will do you fine for now. After you get you`r cam and all that good stuff you`ll be...
First thing I checked :thumbsup:. How hard is it to replace the reverse piston, four bolts and reajust the band ?
Separate names with a comma.
