I hate that problem, Vegas are good for that or is that a Nova
I hate that problem.......up down up down up down. If you didn't have a Vega this wouldn't be a problem.......or is that a Nova
Looks to me like a oil seperator I have seen them on some newer supercharged cars although much smaller.
I agree build your own headers. The satifaction of telling poeple you built your own if great. Plus you can make them do what ever you want. One...
Only if you leave the cap off. I just looked at Tammy's and I did pull the baffle out. On her car we have the 82-85 GT covers with spacers to...
Stroker kits are so cheap now, why not stoke it.
You can remove the baffle, and in the oil cap/breather or PCV cap install some steel wool in the cap cavity. This will baffle the oil and keep...
Or you could get a set from autokrafter in thier maverick catalog...........I think the handles in that catalog fit 67-68 mustangs also :D
And Tom made the set for Mavdog71 :D
Great job, I may have to replace mine after all, to good to pass up.
congrats Lonnie
Steam holes are inbetween the main water passages. Most heads have a hole there but the block does not. To utilize the steam holes you must drill...
Damm good idea, I did that to my truck I forgot to do the car. I guess I need to take mine back out. thanks Jamie
I have 6" in the front lower door. I made a spacer to make it set flat.
If I'm not mistaken all the head gaskets have steam holes. And even the late model blocks don't have them drilled already. I can probly get you a...
The runners are longer (new school), edelbrock quality is great and it looks better so that worth some horses by itself. I have had some sealing...
Taking the B&A intake off and upgrading to an E-Boss, I can hardly wait to fire it back up.
250 6's and 302 v8's have 8" rear ends, Jack the rear up and put it on stands. crawl under the rear and find the ID tag. On the bottom of it it...
Late model head gasket and drill the steam holes if you want. I drilled my mustang because I have .060 overbore and did not want any cooling...
Both Tammy's car and Kens car have the power racks. Both have RCMotorsports Mustang II, tubular a arms and 2" drop spindals. Tammy's car has 245...
Separate names with a comma.
