Ok first of all what do you consider as a stock engine? The pistons will have to be fly cut to clear your lift. with A stock intake and stock...
I would check my piston to valve clears with that cam. My cam is almost like yours, its a Erson Hyd Roller 3,000-6,700 294° IN 226°@...
Hello, From what I understand is it will bolt up with no cutting, but you will have to use a BFH to pound the trans tunnel and where it meets the...
Hello I talked with him today, and he got the car in late 1970. he said it was in the winter and he said it was probley a 71 he just remembers...
Thank you. which MARTI report would i need to purchuse to find out if mine my be a grabber or not? Basic. deluxe, or elite Thanks Jim
Ok thanks, He also said it had a floor shifter. I forgot to add that in the post. It was probley a 71 or 72. he is a realy nice old man, he may...
Hello, I started my new job today and me and an old man was talking and he said he had a yellow 70 maverick grabber with black hood & side strips,...
Hello, I measured my grandfathers 68 mustang convertable where the shirts would go, and it was 77in from front to back and 3.5in from the bottom...
Thats right it is from a eleanor kit. they make the side skirts for 65-68 mustangs and i think I have seen some kindy like them on some 95 and up...
These are $450 a pair and this is the info i found on them. Side Skirts – Line up the side skirts with the door & rocker panel. Rivet or use...
Hello I was looking at some Mustangs and was thinking them Side Exhaust Skirts would look good on a maverick. anyone know the length diff...
Sorry I didn't let you all know b4 but this was used and made on a bridgeport cnc, and the code will not work on all but will work on many beside...
Thanks, but i have desided not to use a c6. I will be rebuilding a c4 if I don't deside to use a T5 5speed manul trans. Thansk Jim
c4 and c5 are a lot a like from reading this forum http://www.fordmuscle.com/phpBB/viewtopic.php?topic=9911&forum=13&14
Hello, I did a couple adjustments and posted the cnc code files for the centers below, if any one has access to a cnc or can find a shop that will...
Hello found a bunch of good c4 stuff here http://www.broaderperformance.com/c4_transmission_parts.htm anyone ever used them? Thanks Jim
Cleaver thanks for that great site. scooper77515 After getting the mav all cleaned and fixed up. I am not realy king on filling my rear quaters...
Thanks there is a lot of info on this forum.:thumbsup:
Hello thanks for the replys. The maverick will probly never see a drag stip but i do what the trans to hold if i deside to. It will have a...
Ok I'll try to rebuild myself. I will get the video and book. Also I have a few Questions. What special tools are needed to do a rebuild?...
Separate names with a comma.
