If the hooker 6901 headers fit older 60s mustangs and Mavericks would the classic Shelby styling Try-y heards work on our maves also I think i...
Thanks everone for you comments. Ford Man I will give them a call thanks. I stell have the fms z303 cam and i did in up with the erson cam which...
Ok I belive i have read that the gt40 and the gt40p valves are the same except fot the exh valve gt40 1.54 or 1.55 and gt40p is 1.45 or 1.46....
Thanks everone on the great replys. I have another question is it realy that inportion to run a high volume/pressure oil pump and 8qt pan on a...
James Miles dash pads are bad both passenger finders on the 70 @ 73 are good left finders bad on both do you havee a extra left finder in good shap?
kacalpito I don't have a clue of how good the tanks will be on the cars Bu I have desided to fix my 70 instead of the 73. sorry
I have see them at radio shack
I was thinking this one be best for me Two, as a dual purpose Street/Strip (1/8th mile) car. Use a 3.7:1 to 3.9:1 gear ratio and a 2,400...
http://www.summitracing.com/customerservice/cs_02index.htm??p_sid=V3xyC-yh&p_lva=&p_sp=&p_li= I ask summet about what stall and rear gear i...
I think I found some:bananaman from crane and it don't even require machining up to a .585 lift. The kit is Part Number: 44308-1...
Ok sorry I didn'y know.:)
Bump!
Thanks everone I belive it should befine mine will not be a daly driver just a weekender:thumbsup:
:bananaman Member that have a maverick/Comet web site post it here for all members to see:wave: Thanks Jim
the 6901 hooker headers fit many other older models also not just the maverick. but thanks for the reply:)
NOS blackjack hearders #85042 for a '66-'71 Falcon,Torino,Comet, Montego,Ranchero with a 289,302 or 351W. These headers should also fit a Maverick...
Need to know if this 8 QToil pan is to much for the maverick "The front sump is 10" long X 12.5" wide 9" deep"
Thanks Jeff that is some good info to know, but what i was wanting to know is how much pressure you nee for X amount of lift would it be ok to run...
how much to cut heads to change combustion chamber how much? I have always been told 10 thousands gives you a half of point in compression...
Yes TFS has a set that will fit with out mechaning the head If i remeber right it is only up to a .540 lift and i need one for a min of .552 lift...
Separate names with a comma.
