Heres mine with torq-thrust chrome 15's
Krelboyne You are right ! I just went and looked at it and it's a Autolite C9AF-***** so I guess it could of come on my car. Thanks Rick
This is the solenold that came on my 71, could anybody tell me if it's the right one ? I have never seen one like this before but that doesn't...
Jeff Thanks for the pic, I don't know what the hell happen to mine, but now I know where it goes Thanks VERY Much Rick
The vacuum line that comes from the rear of the trans and goes over the starter motor, then I think it hooks on the exhaust manifold with a little...
I have looked at every pic in the gallery trying to find a pic of the auto trans vacuum line on a 200-6. I took about 35 pic's before I pulled my...
I think if you have drum brakes you will find that your valve is a distribution block with a sensor that will light a light on you dash if you...
74 Heres what I did with a loose mirror and it's holding fine. I put the car in the garage and found the setting I wanted by meassuring every...
If we had some pic's we could be sure of what you have. But if it has a tube on both sides of the diapham I wouldn't plug one as they are both...
Thank You....:tiphat:
The final fix, Thanks again to everybody for their help ! ! !:bananaman
Well gentlemen here is my fix thanks to your ideas. I have a 5/16 hardened bolt in place of the 3/8, and with a little less torque I think I...
Moneymaker, Simpleman do you guys have or could take a couple of pic's for me and I could see what you have done ? Also went I took the manifold...
Heres a couple of pic's, sorry there blury. Any thoughts
Well the seal doesn't matter now as I broke the rear tab where the exhaust manifold bolts on the head. I guess it's new head time ?
I WISH I broke the ear on the manifold, no I broke the ear on the head. And you can't call me any more of a dumba_s then I am.
Putting on the manifold today and I broke the ear off in the rear. Anybody use JB Weld before and know if it might hold ? The manifold has 13-18...
Gentlemen I pulled my engine in Nov to repaint the engine bay and engine. I have had the trans sitting like the pic shows since then and I wonder...
An update, few more parts and it's going in.
I used Dupli-color high temp primer and 1606 Dupli-color dark Blue paint. Why should I tip it over and put on another coat ? ? :huh:
Separate names with a comma.
