Hello fro Salem, Oregon! :LOL:
Hello from Oregon!!! (y)
I installed a "Jones" stamped X-pipe, with Flowmaster glass packs. Works & sounds great.
Check the 2-3 Servo - it can stick or the rubber on the piston is allowing leakage around it. Check the modulator valve - rubber hose at the...
I replaced my point distributor with a 1976 Duraspark. (Bought from NAPA). Previously, I bought a REAL junker with the control module from an...
Try "Unlimited Products": http://unlimitedproducts.com/Maverick.htm
Can anyone share their jet setting for a Weber 32/36 DGEV in a mild build 200 cid inline six? I have a '78 Duraspark distributor that I raised...
To measure high amperage with a simple volt meter: Put a 1.0 ohm high wattage resistor in series with the circuit, and measure the voltage across...
I understand your concerns. I manually pumped fluid through the system. I purposely did not run the fluid through the radiator transmission...
I changed from a manual 3-speed to a modified C4 automatic. I installed an aluminum radiator, and a separate transmission cooler. I used a...
Thank-you very much! :clap:
I replaced the stock Carter YF carburetor with a Weber. The Weber has a an electric choke, the Carter had a "choke stove". I seem to recall that...
Some strippers are very caustic and not water soluble. Some are water soluble. Some read as "green" and (more or less) safe. JASCO has a...
One - 1970 two door
Does any know if they are accepting new orders?
Hello from Salem, Oregon. (y) I've bought parts from this auto wrecker in Vancouver, WA (specializes in classics): http://www.allamericanclassics.com/
Hello from Oregon! (y)
Yes! Six in a row, makes it go! :thumbs2:
Do you have a web-site or link to a catalog of your merchandise? Thanks
Ok.....so you have to wait a few months. :biglaugh:
Separate names with a comma.
