Looks like this one. http://cgi.ebay.com/Old-Vintage-HW-Hot-Wheels-redline-mighty-maverick-/360279254471?pt=Diecast_Vehicles&hash=item53e25125c7
The lifters and cam are about 2 years old. It just started doing it. I ticks after it has warmed up. Goes away sometimes.
It is 351w. Plan on taking the valve covers off tomorrow for a look.
Well I located the stereo connector and everything lite up perfectly. Thanks for the help guys.
I have a lifter or 2 tapping. I have heard that putting in a quart of ATF may cure the problem. Has anyone tried this with any luck? If not do you...
So if I connected to the fuse box they would always be on correct?
I dont have an ashtray light. I was gonna try to wire it to the fuse box somehow. I have some fuse jumps and was gonna try to use those but dont...
I need light to my tach and gauges. Where do I need to hook these up to get power for the lights. I wanted to splice it into my headlight switch...
Glenn sent a hood to me on the hound and they called when it got there. Seemed really easy on both ends. I gotta send you a final pic of the hood...
I am running the msd blaster 3 coil. Does this make any kind of difference?
Is it possible that the ground needs to be better. I need to hook up other gauges and do not have a power source. How can I add a circuit to my...
Would I be better of getting a newer one? Mine is really old also.
I hooked up and old suntune tach my dad gave me today. The problem is it does not register any rpms at idle. When I hit the gas it does register...
I want planning on using that cable I wanted to know what the piece I had circled was called. I am going to use a lokar cable.
I need one of the plastic pieces that connect the gas pedal. I am not sure what this piece is called. Are they available. I have attached a...
I am planning on buying the lokar throttle cable but am concerned about how it will hook up to the gas pedal. What mods are needed to get it to...
When I put it on do I just need to attach it to the trans and then the card? Is there any thing else to it like adjusting?
So it needs to be extended and made taller?
I have a holley 600 carb.
I have a factory kick down rod from a 302 will that work with my 351w?
Separate names with a comma.
