Joe its right under the trim piece. Where the window trim meets the door trim.
My thought was maybe a shop could pull it out somehow.
I was in a wreck and got some body damage. I have attached a some pictures and want to know if this is repairable or not. Thanks.
If I cant get the end links straight up and down what will happen if I drive like that. I didnt notice if they were straight when the original was...
I used the original spacers. It sits back about an inch or so. The spacers that came with the bars are like an inch and a half. I have a few...
I just installed my new sway bar and end links today. The end link seem to be kicked back a little bit. What kind of problem is this going to...
So should I get a rebuild kit before I tear it apart?
It is a Holley 600. So i should take it apart and soak everything in carb cleaner? I think I can handle that. I thought about maybe spraying carb...
The vacuum lines are new and on there tight. It dies as soon as I touch the gas. It will idle for about 5 seconds then die. I am not sure what an...
My car has sat for 2 months now. I been trying to start it for about 3 days now with no luck. It will start when I use the choke but dies after a...
So your saying as long as the edges are completely bonded and there is no gap I should be fine? Not really sure what you mean by minimal gaps. Im...
Will i need to worry about cracking?
I bought this cowl from harwood. http://www.eharwood.com/catalog/product.php?productID=82 I am going to have a body shop bond it on but am worried...
I came upon this listing how and why is this used?...
I bent a strut rod on my 75 and can only find this....
What is your back spacing in the front?
Would I need a spacer? Doesnt seem like I have much rrom to play with.
Well my rims are 15x7. So i guess your sayin 225s up front and 245s in the rear would work out.
Separate names with a comma.