I believe Robert Raney has a C6 in his BBF Maverick. I have a C4 with a Performance Automatic hardened input shaft, Transgo shift kit, and 3500...
Did these valves come in the AFR heads? I wonder what brand they are? My guess is the detonation opened up the pit, but the "hot spot" probably...
That 426 sounds similar to a combination PAW used to offer (don't know if they still offer or not). It was an offset ground 400M crank with...
I had to do something similar on my 460/c4 combination. I had a B&M holeshot C6 converter and used a Performance Automatic C6/C4 adapter on the C4...
The grill and driving lights are still my favorite part. What Ford should have done. It would have been a nice Grabber upgrade. Cleaver
I have always thought it was best to spend your money on the block, machine work, and bottom end (especially if you are not sure exactly where you...
About 5 years ago I bought a non-running 73 Torino fastback for $125. Had a 351C 2v. Rebuilt the carb washed out the tank and fuel lines and got...
Loops are easy parts to make that the most novice builder can handle. The best fitting loops start out as a 1" wide x 1/4" thick piece of flat bar...
For a new cam break in I always use straight 30 Shell Rotella and a bottle of GM EOS (engine oil supplement). Cleaver
The C shape will spread out the load on the frame. Actually I think 12 gauge would be fine (less than 1/8" thick). You probably want the c plate...
Getting a little off topic but I saw a home made filter like Shadow Master showed. It was made from a tall pint size jar filled with marbles....
Just run one filter and a PCV valve in the carb base. All engines (even brand new ones) leak past the rings and valve guides. Sure there are...
About any parts store sells remanufactured distributors. Just ask for a late 70's early 80's something with a 302. As far as I know they are...
I've got Petronix in my truck. Compared to the points, it was as different as night and day. Fires much easier and idles much smoother. Best of...
I just run a duraspark with an accel coil on my truck. MSD box will also drive a duraspark distributor. Of course you have to splice or...
If you pull the top off the carb then you can get down into the venturis better. Use a small round hobby file and remove all the casting flash...
I built mine myself. Started out with a set of Hedman 1-7/8 diameter set for a 79 F250 2 wheel drive and 4 J bends. I think the headers were like...
Well - I voted Cruiser because it was in the middle. Mine happens to be an unfinished primer painted race car that I happened to slap a...
OK thanks guys....it's definately 50 oz. I found an old harmonic balancer in the shed that I knew came from a early 70's something and compared it...
Should be OK with stock diameter valves - but I would check piston to valve just to feel safe. Also double check the valve seal to the valve guide...
Separate names with a comma.
