MSD Boxes don't seem to like iridium/platinum tipped spark nuts...Run a std autolite spark nut in it. It will be just fine. Sounds like a pretty...
Bonded for regular grocery getter duty...Rivits for heavy duty brake beating/heating kind of use...IE: Drag racing/road racing...You get the...
Up here, the local natural gas co. (Niagara Mohawk) Had a fleet of em...2 doors and 4 doors for the meter readers and such to make their rounds...
Dealership probably ordered it for their loner car program for their service dept...
Impressive...So, do you think it was bearing failure, gear or case failure???
Pickled it for the winter...:(
Are those shocks rebuildable Frank??? Coil over shocks usually are...:scratchchin:
Main reason Mavericks didn't get a 4 speed or a 4 bbl carb on north American continent: Ford did not want it to compete with the mustang for...
One little blurb does not a hate article make...At least the writer said it was good looking...As for build quality. All the manufacturers were...
You did put a new timing chain/gears in when you did the cam swap right???
Does the car engine run well??? How many miles on it??? Do you want the fuel injection for the mav???( Theres a lot to be said for being able to...
Yes the seam is leaded at the factory...Grind all the paint off the area...Wear gloves/goggles when you remove the lead. It may pop and spit at...
Do not go to the local collision/repair shop...Do your research. Find a shop in your area that specializes in classic/antique cars. (they speak...
Any one of em may have hidden damage/rusr...Grab one that's still in a vehicle. 94/5/6 ford exploder/mountaineers have roller 302s in em.( good...
Absolutely Stunning Glenn!!! Just...WOW...:bowdown: As for the 55...Love it, and those caddy hubcaps top it off perfectly.:thumbs2:
But everyone refers to it as a prop valve instead of a " distribution block" Soo for the sake of confusion...Its just like the term Dash board...
Possible causes: E' Brake is applied...Brake shoes installed backwards...(There is a primary/secondary shoe) Primary has a smaller friction...
Are you sure the mount isn't broken??? Might want to check that out. Simple method for strengthening the mount on the left side (No rocket science...
regular V8 (302) Maverick frame stands and rubber mounts will work just fine. And welcome to the madness
You could try clamping it to your level there so its straight and pouring HOT water on it...Immediately followed by COLD water...Outside of...
Separate names with a comma.
