Letting you guys get first chance at it, since you have a pretty good idea of what I have, and what is left to complete it. It has sat in a...
1/4-20 1/2" deep sounds about right...
The top of the nipple wasn't flat, and had a casting line in it, so I ground it as flat as I could so I could center punch it and start drilling a...
My cam has a small base circle, but only because that was the cam that a friend gave me. It had a standard cam in it that was not small base circle.
All you gotta do is find one with two "nipples" in the top, drill and tap them if they are not already (I had to) and install the roller lifters...
here is what I ended up with. You can see the lack of ground clearance with all the other junk in the way in this photo. Keep in mind that this...
I ditched my side exit exhaust when I put in the subframe connectors and caltracs. My car sits low, so there was no longer any room for it all. I...
Brief write-up...[ATTACH]
Well, I guess that explains that...
I know this is relatively new. In the past, if I went to New Posts, I would see 25 or more threads listed, but recently, I have started to see...
Personally, I am an idiot, and don't believe nothing till I try it myself. So I try it, and tweak it, and don't like it, and go back to what I...
Thanks! I was too lazy to go back and delete, and re-write it all.
Apparently was the cover car from 1980 edition, and they brought him back for more current photos and writeup. Dec not D3c...
I installed one, and it did not quiet it down at all. I had a flowmaster drone, and it moved it to a different rpm range, but that is all it did....
I have some for a different, but similar mod. Holler if you don't find Paul's
I have blown the PCV valve clean recently. Might try to replace it, and see if the brake cleaner isn't doing the trick. Cheap fix. And there...
Also, what is "HD 15w-40"? Are you talking diesel engine oil?
Yes, transmission would be last thing to go (and/or A/C, but that is relatively minor). Rear-end has already blown out, and been replaced with...
I have maintained this vehicle very well. At this point, I have just turned over 298,000 and don't expect much more out of it. I have a plan for...
I just applied for my counseling license in Oregon, and plan to move there soon... And I put plates on my garage for decoration, and have none...
Separate names with a comma.
