If you added cold water to a hot engine, you could have cracked the head. Question is, did you put the head gasket on right, and not upside down?...
#2 & #3 exhaust valves look mighty oily compared to the rest of them, # 3 is the worst looking. Cylinders look good, cross hatch is still...
Need to see a pic without that center cap.....
The ET unilug was a better system than the Cragar style. ET used a oval washer that fit into a recess in the wheel, Cragar washers fit against a...
Are you trying to put this on the car in your sig, a 1970 model? If so, that is the reason it doesn't fit. 1970's never had a V8, so they didn't...
I used a 72 Comet manual center link when I did my Granada brakes. The Comet tie rods fit fine....
How high does that sit above the carb? I may have to look into that if I have to go with a carb on the Vette.....
That's what I was afraid of. I guess there might be some metric to standard adapter fittings out there. I could just make new lines with the...
Anybody know off hand if the line threads on a 99 Ford Ranger master cylinder would be standard or metric? Got one I was thinking about using on...
Didn't Frank go through about every Ford header that Summit had in stock before he found some that would work?:hmmm: Might drop him a PM and he...
My 47 Lincoln is like that. You can't lock the door with the button and shut the door. And if you lock the closed door from the inside with the...
Dennis, the U joint you have is for a factory GM double D shaft. Speedway Motors has a note about the GM DD shaft being smaller than the...
If you start and stop it from the camcorder view, you can see it went to the left as soon as he left the line.
That looks like it's on the "T" behind the egr valve. Probably just an extra port that wasn't needed after some of the smog crap was taken off....
I know the feeling Jim, I hated to let mine go, but couldn't get my dream of a pre 48 in that kind of shape without letting something go. If you...
Wish I could make it, but that's the day of our local in town show. Ya'll wouldn't want to look at a yeller Vette anyway, since that's all I've...
I've seen those in older cars when I was growing up, so it has been done. IIRC, the ones I saw used a motorcycle type throttle mounted on a lever...
This will all be hidden by carpet and peel and seal, so no problems with sunlight, at least inside. Underneath, I haven't decided what to do, it...
As you can see in my pics, the trunk floor is rusty from the carpet getting wet and staying wet. I don't know about the front floor yet, but I...
Here we are after a few days work with some simple green, a brush, two rolls of paper towels, and lots of elbow grease! [IMG] [IMG] [IMG] [IMG]
Separate names with a comma.
