Me too, but we paid into that. :)
I think everyone is entitled to a funded project in a rich country like this. The federal government should provide everyone with $1000/year to...
I cleaned quarter panels with heavy surface rust (no pitting) with OSPHO. Altho OSPHO is a converter, it worked well to remove the heavy surface...
I plan on running the Windsor with the AC compressor acting as the AC delete pulley. :) If its an aluminum compressor, the weight shouldn't be a...
Found it. This is worth a read if you're converting to 3G. http://fullsizebronco.com/forum/showthread.php?t=55169
I previously came across a great web site with info on 3G alternators but I don't find it now. What I remember is the distinction between 95A and...
I wouldn't drive it till the sway bar is flipped. Even if it isn't hitting with the vehicle at rest, it might when you hit a bump or dip. Talk...
I had the same thing with a complete F4TE engine, but with the heads on. It was carbon that was shaken loose and collected under the flat part of...
Takes away ONE excuse for procrastinating. :D It'll sure help with the NC summer humidity.
I used Nason single stage in my shed. Had 2-3 bugs in it and a nib in every square inch. Color sanding and buffing took it ALL out. Hope your...
Put a 15.1K BTU/Hr AC unit in my work garage. There was a perfect place for it above the header over the window. [IMG] It has a remote control...
If you power the pump from a switched (key in run) source you've defeated the low oil pressure switch. I ran a wire from a switched source thru...
I used the Ford Racing wires on the Maverick and liked them. Got a set of MSD wires for the Windsor in the F100 and the straight boots put them...
I use this one. http://www.download25.com/install/free-picture-resizer.html It does fine for me.
I had the same experiences with another "Peoples Car", a restored '68 Beetle. :yup:
Yep, its true. At a car show, people will stop and grin as they recall their Maverick experiences. Everyone wants to tell your theirs. The Mav...
Interesting ... aren't you concerned about damage to the paint? On mine, the engine bay paint was scratched and chipped from the engine...
Welcome from Raleigh. Great project car. Sounds like you have what you need between your LDO, your Ford family and mmb.maverick.to. This is a...
Plywood isn't going to be strong enough to hold the battery hold downs in place even in a minor collision. I would want plastic to contain any...
Since the topic is active again in another thread, I'll report that this "fix" only worked for a little while. :(
Separate names with a comma.
