That is the PCV port. There’s no EGR hookup. I thought you were trying to eliminate the EGR. This was how the 65-68 289/302 did the PCV. - Matt
Still out of town for work, but here’s a link to the same spacer on eBay showing the top and underside profiles. Can send some pics Friday. -...
Here’s a pic. This is off of a 289 2v but should work fine. Also have an extra carb to spacer gasket you can have. I won’t be able to ship it...
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F163900845399 Some new Mustang ones. Still would have to get the...
I think I have an extra 2v spacer with the hole for the PCV. $20 and it’s yours. Just let me check tomorrow and see if I can locate it. Matt
That clutch fork is for an older truck or car (pre-60).
Steering box should be on car before headers.
Put my Comet GT to bed for the winter and took stock of my parts collection and what I still need to start working on it in the spring. - Matt
I've got a new rebuilt points distributor for a SB if you need it. That dual point cleveland distributor would go great in my 70 351C 4v. :) - Matt
The stance of your car looks just about what mine looks like. I would say there is nothing wrong with your rear springs unless you are wanting it...
I agree with Krazy, that looks to be a Montego MX Brougham. They built 43 of those with 429 4v most likely the N Code. It is a little deceiving...
Thanks !
My 8.8 in my 86 SVO had a large weight hanging down that had two bolts running up through a bracket like that. I’m guessing to help with axle...
My grandfather swore by diesel fuel to wash things like that up, of course you run the risk of getting junk into the bearings, although if the...
I think I bought mine for my 71 Comet at Advance.
Anyone use the Scott Drake roller bearing clutch pedal shaft bushing kit? Did you just use the bearing components and not the replacement shaft...
I've seen some 4drs with argent with stainless
Also, those were a 71-72 only for the stainless. I might be incorrect on the 72 part, but the later GT grilles were painted black like the...
I have a set of the stainless ones sold on eBay. Was perhaps going to use them on my 57 F100 project, but I might just try them on my 71 comet....
I’m pretty sure it’s the second. That’s the same one I had in an original setup and also the same/similar as the one I had on my 70 Mustang with 351.
Separate names with a comma.
