I just rebuilt mine recently and it wasn't difficult.
Yes. As for your first question the answer is also yes, although not by much.
Mine used to have the 6 cyl throttle cable too so I know that can work, but you may have a point on that kickdown rod. Easily remedied with the...
I'm sure someone here would have the crossmember, belly bar, frame stands, anything you need. Could post a want ad in the classifieds. And if by...
There's two C4 crossmembers. One has a single "hump" for exhaust clearance the other is clearanced on both sides. You might not NEED the...
Drive shaft is the same. Trans crossmember is probably ok unless you're doing dual exhaust. You need the reinforcing "belly bar" under the...
That's what I did. Hell of a deal and one of the best things I ever did to the car.
Thanks! It's not on the level of some of these other Mavs on here, but I think it's a pretty decent driver.
What I'm afraid of is that those 1" lowering blocks may have compressed a bit. I'd be a lot more comfortable thinking I just failed to tighten...
All of 'em. They weren't just sloppy loose, but they were loose enough for movement... Yeah, they're tight now. Any tighter and I'd be...
I'd feel better if I knew for sure it was a mistake on my part, but I swear those nuts were tight. So I have to wonder why they loosened and...
I'll break from the pack here... You didn't buy a car that old for gas mileage. I sure didn't. Me, I'd yank that six and install the biggest,...
Ended up not using that yoke. Rubber didn't look so good, plus it was significantly shorter than the stock one... But I think I did find the...
If you're changing rotors it's an ideal time to change the wheel bearings too, if you haven't already. New grease seal either way.
Bout to change that u-joint... I have an extra C4 yoke that happens to have a damper on it. Is that a worthwhile upgrade or just another way to...
Don't know anything about the pads that come with those rotors, since I didn't get them as a package deal like that, but I am definitely satisfied...
I've been using those rotors for a long time without any problems. The pads I used were Bendix ceramics from Rockauto.
Thanks, y'all. Coolest part is being the Stig was his idea. For anyone who doesn't know, Stig is a character from the British car show Top...
Or you could always do this: http://mmb.maverick.to/showthread.php?t=49782
That's what I have. [media]
Separate names with a comma.
