From the pics I can't see much difference. So what are the differences?
after I came back from the silver state race I started slipping my clutch, probably the 3.0 gears. I had a fairly stock clutch. This is what the...
So Bry thinks we should be able to use his spare return line regulator to install it right after the fuel pump and see if that makes a difference.
Ever since we made the drive back from Nevada the fuel pump has been dropping pressure from 7.5 down to about 6 when I sit there idling and when...
I didn't even see a snap ring, you're probably right, gonna look at bryant's car and see what he has
I made the purchase, let's see how it turns out.
here is the window frame I have....seems that it was already cut down to size, it's a decent fit. Can I just take this somewhere to get glass made...
so it's a 1937-1941 ford front axle.... it's 48" end to end and from the holes it's 38.5" [IMG]
So we have got it in a more "presentable" shape so we can get it registered. Headlight temporarily installed, fuel cans installed...I really like...
Is this brand any good? I found it advertised for under $600. http://www.lotostechnology.com/product_p/ltp5000d.htm
I went through a mess with the DMV trying to get the car registered. The VIN needs to be verified and I had to get it weighed and then the DMV...
Good advice, thanks guys
Is it a ford, Chevy? And as for measurements, once I measure it is there a chart to refer to?
anyone know what year car this I-beam is from from this truck? [IMG]
tail lights and turn signals and brake lights will be all controlled by these trailer lights, hope it works... [IMG] [IMG]
more pics of the tubular bars running within the frame...I hope we can get rid of some of them... [IMG] [IMG] [IMG] [IMG] [IMG]
we gonna work on the rear end also... the ladder bars apparently are going in at an angle and are supposed to be more paralleled with the...
Bry looked over the drive shaft and said it's a mess... welded incorrectly... gonna get that fixed at the drive line shop... [IMG] [IMG]
I removed the tie rod and going to get a nice thick one that I can put a heim into ....this current one has the toe out and can't be adjusted down...
the front suspension is a quarter eliptical setup... attached to the front part of the frame and then attaches to the I-beam... [IMG] on the...
Separate names with a comma.
