looks killer. is it driving yet?
ive delt with a few 302/5.0s that have vibration problems due to flywheel/flex plate issues. i had one that had an aftermarket replacement...
i was autocrossing again today. i really made no changes to the car from last time. it was a great time. the car works so well. the driver has a...
i was talking with carl from chris alston chassiworks this last week about strut rods. he said thier old design had a problem of casuing the front...
frank (71 gold) has an ls in his car i believe. joe dirt put an ls in a maverick with a turbo but left the shock towers. joe dirt did a build...
no im talking about making my own. ill take the hooker 6901s and cut the bottom half of the tubes off. then put 2 into 1 collectors on them then...
i had the 6901s on 2 different mavericks. they hang pretty low under the car and on one of the cars they hit the pitman arm and limit the left...
yep one at a time. either on balancer if you can securely reach it or under the oil pan with a big enough block of wood to spread the load evenly...
not to hard if you have a jack to lift the motor off the mount.
i first would be looking over the exhaust system for it contacting anything it shouldnt. also i would bang on it with a fist in different areas to...
is it the feel of a vibration or the noise of a rattle from a vibration? if the idle speed is too low in gear the motor could shake pretty good.
the pitman arm needs to be changed along with the center link, or you can get and adaptor that replaces the control valve that will work with the...
no it would be taken away. something like this [IMG] so if your engine and trans are pointed up 4 degrees towards the front of the car, your...
coping the stock one is a good way to go. especially if you didnt have any vibrations at high speeds. the best way is to set the diff up in the...
ah, i thought you had a standard t5 not a top loader. the t5z will be a little better on the clutch than the top loader. 3.0s or 3.25s should be...
the 2.75 gears will put a work out on the clutch to get the car moving. i would definitely recommend a ratio change. i dont have a specific...
we have several places locally that make springs. i would search your area for a spring builder.
you can get custom made springs that have a 2" drop in them. you will probably also need lowering blocks to get that much tuck.
Separate names with a comma.
