I won 8.0 index in my z28 a couple weeks ago. I have had the maverick at the track twice and the best it would do was an 8.44 in the 1/8 so I...
I look forward to seeing what it will do at the track
prostars look good on these cars
turns out someone stole the brake light switch:mad:
just the pic I was looking for. thank you:2thumbs:
On my red car the brake lights do not work. Do these cars have the switch under the pedal like an old ford pickup. Also any ideas or wiring...
nice, whats the engine combo
if you are on a budget I would do a 302 .030 or so with forged flat tops, stock crank and rods and afr 165 heads and a moderate cam and converter....
went to the track again and it done better. The balancer is covered in paint plus I didn't bring a timing light. I guessed the timing and seemed...
I will probably get a new balancer with timing tape and a pointer in the next few weeks. I had to have the transmission redone in my Camaro and...
on the positive note it does have compression. 5 cylinders were at 150 2 at 155 and 1 at 145. I plan to check the valves this weekend and get a...
shows how much attention I pay lol:rl:
I haven't checked the valves. since they are solid do you have any ideas on what the valves should adjust at. The car may rev a little higher but...
drag raced it
this is what I could find online about the cam Intake Lift: 510 degrees Exhaust Lift: 510 degrees Intake Duration: 318 Exhaust Duration: 304...
agreed but when it comes down to it I have no desire to spend a lot of money on this car
lol, I was launching anywhere from 1500-2400 rpm trying to find a sweet spot. I shifted anywhere from 5k to 5600 rpm. around 5300 seems tp work best
I didn't build it but this is what I was told 351w stock crank and rods with flat tops le mans cam, basically a low lift high duration 40 year old...
I know, for the 1st time out I figured 8.30's at 84 or so
Separate names with a comma.
