I've heard of it. Fairly newer way to buy cars. I'll tell you what I'd tell anyone buying any vehicle without seeing it up close and personal. The...
And by the way, the Comet in the Craigslist ad mentioned before my reply looks pretty decent especially for here in PA. Those are more scarce than...
The cars are scarce for sure. While a lot of them were made during their production run, like so many others, many have gone to the garage in the...
Back when I did the Mav copcar, charging amps became a major problem due to the emergency lights, etc. I got a custom 100 amp alternator with...
The best way to recolor the plastic is with interior dye. If you're changing colors, there are a couple of options. If you're retaining the...
I was referring to replacing the lifters. That's what you need the tool for.
No it doesn't. Like I said, you will need to buy or borrow the valve removal tool.
It definitely sounds like lifters. First, I would check your valves with a feeler and adjust accordingly. Might correct the issue. If not, they...
Most commonly, when the fan speed doesn't change, it is due to a defective resistor. These are usually a plug in module under the dash not far...
I'm not so sure they were three core so what they mean by extra capacity, I'm not sure. If they were three core, they must have been pretty...
Welcome and best of luck. Good starting point for sure. A couple of words of advice from someone who got a 21 year sitting Mav back to life. Don't...
He's right. That's not the original horn for your car anyway.
Welcome from Western PA
Thank you guys. The compliments are really appreciated. The car is far from done. I still haven't fixed the paint flaws and the sport mirrors...
[ATTACH]
Mavs went 5 lug prior to '74 so they're correct on your car. There could be several causes for the shaking. My 250 doesn't idle smooth even...
The way the pros do it when sandblasting is after do any body work needing done then spray an epoxy sealant before primer. If you can't do it...
When I used one, I used vinyl dye to color it and simply glued it on. It looked right and had no complaints.
So far, pretty much everyone that has used the dash caps have been pretty satisfied with them. I used one on a past resto and it worked out very...
As to the nut rounding, I recently replaced my calipers which were pretty old. I had one start to do just that. I was given some advice that since...
Separate names with a comma.
