Found a part on E-bay with part number D5Dz-19B999-A YH-275 that is a direct replacement for the maverick. This fits my 1975 anyway. Its is the...
Finally got back to working on the '75. Ordered a few miscellaneous parts. Found this A/C vacuum control assembly and got one on order. (They have...
When you get to it, take some pics if you can and give us an update. I'm about a year from pulling the car apart to do paint now that I have most...
I know this is an older thread, but does anyone know if this conversion would work on the '75 Power Brake set up, or would I have to convert to a...
Finally put the replacement fuel pump on and got the car running again- YAY! Then spent some time using plasti-fix and got my glove box dash...
How did the meet go?
Figured I would start a thread for all those Christmas wish lists, especially for all those things that may not yet exist. Maybe the holiday magic...
Takes care of that constant issue with the shock towers o_O
I'll have to go down as an "Iffy" for this year. Just got a fuel pump ordered and don't want to put the interior back in until that is all good so...
The computer triggers a relay, that then feeds fused battery voltage to the pump. All in the trunk. I have an older Ford factory EFI system with...
The fuel system is basically all new this last spring, including the pickup tube and filter in the tank. Jumped the fuel pump from the junction...
Hey everyone, I know we're all hiding out due to the virus, but is anyone thinking of getting together this winter? I finally got the Mav dug out...
Finally dug out far enough to get the Mav uncovered. I had moved up to my shop in July (remote work is wonderful) and had packed in all my...
Been slowly digging my car back out. Back in June, got the opportunity to move full time up to my shop in Show Low. Gotta love that telework. I...
I had them reweb the front belts for my '75, they did a good job
Its been a while since I looked at this but I think I needed to bend the pickup tube to match the Maverick one. Didn't actually get it so not...
There is now an EFI compatible fuel sending unit that has the extra return port welded in beside the pickup tube. Great option I saw just after I...
Considering these go in from the side on the lower part of the tank, I would suspect it would read full till you burn some gas down a little, so I...
Make sure the clips are going back in the recessed areas set up for them. I recently did mine and took me a bit to figure out how to get the clips...
I certainly hope so. Have to put the lights and some of the interior back together, and fab a montecarlo bar since neither of the shock tower...
Separate names with a comma.
