any body know how to remove the knob on the ft of the box ? thanks Ron
hey Mike give us a update on what you need ,i'm sure i got something you can use Ron
been a while since I took it apart, does the wavy plastic washer go in the bottom of the shift collar,and I believe theres a flat on top? thanks Ron
hey Jeff nexttime your at the yard see what they want for it I'm in hartsville so i'm close enough to drive over thanks ron ps Ric keep us...
good job frank and good luck
great honor and congrats, I've seen pictures of your car and you both deserve it
anybody got any tricks to getting better performace on a 200 i just can't bring myself to spend $300+ for a header ,I already did the duraspark 11...
Welcome To The Board Ron
Thanks Guys Will Do
Anybody Got Any Tips On Installing Or Should I Just Pay The 50.00 And Be Done With It Thanks Ron
looks good Ric keep us updated
Make Sure The Gasket Surface Is Flat And As Don Stated I Lay The Pan With The Side Of The Pan On A Vice And Take A Ballpeen Hamer And Dimple The...
i used 100 first then 400 then 1000 and used wd40 as a lube it came out pretty nice
i bought some of the other ones he had on e bay about 6 mos ago the quailty was poor at the best he said he was trying to get better quality but...
hey mike thats a tough one , most mustang stores sell a plastic housing kit about 15.00 that goes inside and uses silicone sealer , i don't know...
as usual Dan comes thru again
looks great eric what sequential kit are you going to use ?
hartsville i know there are a few but never see them on anymore
Ya Jamie It Should Turn ,try A Rag Around The Shaft And A Pair Of Channel Lock Pliers And Rock It Back And Forth . The Shaft Goes Into A Cluth...
hey mike as you know there is no load out of gear so it will idle smoother ,like ronald said possible vacumn leak try carb spray around all the...
Separate names with a comma.
