received my new painless wiring harness in the mail... got a trunk mounted version.
i too, installed an o2 sensor bun and drain in my gas tank, real easy now... also in my trans pan.
if you want weld on customs / universals, check somebody like fatman fab, or rustys off road..
looks awesome
more welding and hole patching
no, nothing else as far as i remember...
more welding... https://www.dropbox.com/s/lsjfklzz94r4tqt/2017-01-30%2012.57.19.jpg?dl=0
i purchased mine directly. probably the best way. very helpful people cut your shock towers out sparsely. keep most of the side panels...
dont judge me on my welding... crappy welder. and still learning. but some grinding they are cleaning up well...
well, its been awhile sense i posted... i cut all my front suspension off, then 3 weeks later i was laid off from my job. so i went ahead and...
i fabricated my own crossmember. quite easy to do if you can weld..
i used a lokar shift linkage, and the lokar shift arm that goes into the transmission, had to do a little bend but worked great......
i second bmcdaniel's remark... its the "while i'm doing this, i should do that" which snowballs the project...
that is why i used the combo to keep the speedo ;)
are you talking about VSS (vehicle speed sensor) , signal? or TACH i installed a combo VSS and mechanical speedo output on my 4r70w.. sence i...
I run full 12v to all my coils.. have forever. better spark
I don't understand where or when people decided that they can touch peoples stuff without permission. people that have classic cars usually take...
ya, I researched doing a turbo setup on my impala.. upside. more power, can save some gas. downside, you can destroy your drivetrain. at...
i ran trick flow heads on my 66 impala for years, loved them. I installed trick flows in my comet, and great so far, if I can get all the gremlins...
my 74 comet came with disc/drum, I modified 97 explorer rear brakes, and works awesome. junkyard brakes for $50. the doner vehicle just had a...
Separate names with a comma.
