i currently have the 8inch original in the car. i guess its a 3.0:1 . i am thinking of 3:5's. something more getup and go, but not overly nuts....
http://www.usshift.com/usq1.shtml i have one of these on my 4r70w, it works awesome. lokar for the shift linkage.....
the mav in fast movies, when they talked to the stunt drivers and actors said it was one of the funnist cars there...
ha,no just was reading posts.. my bad. I just did a compression test on my engine and they are within 3 psi of each cylinder. lucky day
hook up an air compressor line to 5 and see if its leaking ito the intake or block, or exhaust.
installed my aeromotive phantom 200 pump in my tank, filled up the tank and let'er rip. works great. highly recommend it. making a recess in...
hi, does anybody know of a good shop in the little rock area.. thanks arlan
i wonder if this would work: ADDCO#020-549KSway Bar Kit 1964-66 Mustang Front Bar: 1-1/8" Diameter Rear Bar: 3/4" Diameter
made my wiring harness for the fuel pump, I want a disconnect so I don't have to deal with wiring while trying to drop a tank again. I also...
lucky find i would like to get the small bumpers and stuff off of one... i live in little rock now.
dont' forget explorers, and mountianeers.
i am running a 4r70w, with a bauuman tcu, now http://www.usshift.com/. i installed a aode tailshaft housing and used a aode trans mount. and...
maverick / comet = squeaking... check your spring purches, spring isolators, and bushings. your jurking bump isuse, i would make sure you don't...
the eps module hack on ebay, needs to be mounted inside your vehilcle, its not waterproof.
the 4r70w is working out great for me. the 75 is just a beefier version by a little. the baumman controller is great.
here is my recess I welded in today. 1.5 inch drop. that gives me 6.5 inches clearance to the bottom of the tank. the width is 7x12 recess.....
go electric.
if i was going to change the hood hinges, i would create something like what is on the mercedes, so the hood sits straight up when working...
cut a big hole in my fuel tank, to create a spot for the in tank fuel pump.
well sense I have a good tank, I decided to cut a drop in the top and I am going to install an aeromotive phantom 200 fuel pump kit. I cut a...
Separate names with a comma.
