This all depends on how wide of a wheel you have. On a 17x8 4 1/2 BS cuts it close to the fender lip on a lowered car. 4 3/4 to 5 in on an 8in...
Nice runs bud, are you still running the varishock da front and rear.
Are you losing any water/coolant? First thing I would check is the oil for any water after a severe overheat. As far as the temp difference there...
I'm a little disappointed in the Gatorade flavor but the brakes look good.
Just buy a new tank, they sell them new for a little over $100 shipped. I wouldn't waste my time welding on a used tank. It could cost you a lot...
Those wheels look great
I used a master for 74 maverick and a wilwood adjustable purportioning valve. The 74 uses a 15/16 bore size. I use this on a manual brake set up...
Thanks for the kind words, there is a local guy that I runs the ABS box and has had great success with it as he tracks the car in national events....
My box is not a Borg unit, a company in southern CA is producing the boxes ABS power brakes - http://www.abspowerbrake.com I've had no real...
Took me a while to get this sucker put on against the rag joint. Two people should knock it out fairly quick. [IMG]
Time to disassemble the steering column. Get your hammer out and go to work by separating the main shaft from the column. [IMG] This is what the...
The rag joint is approximately 2 3/8 closer to the firewall so that will have to come from the column. Headers fit just as bad/good as the old...
It's a different wheel, north of $300. Circle racing sells wheel vintiques as does summit under the circle racing name. I found these on eBay....
Whoa, wait just a minute. We're in a drought here in CA. How much water are we talking about. Fines shall be imposed for excess use. There will...
I guess I'll find out, I'm not a fan of gloss black tail panels.
I used a satin blk chassis paint on mine to help with spilling gas and followed the original line. [IMG]
Don't forget to use a good quality sandpaper, I like 3m gold. When I did my comet I bought a role of 80, 120, 220, 320 and 500. Then a couple...
Now might be a good time to add an o2 sensor to the header or collector for tuning purposes.
I also run the 6901's with AFR 185's. Pass side fits easily and driver side fits with no banging on the header. I did have to lift the engine on...
I think these are U.S made being they're a lot pricier than the American Racing stuff
Separate names with a comma.
