You can rent a puller kit from your local parts store to remove your pulley. I used one from Advance. Worked fine. Be sure to use the supplied...
Melvins has one similar to the original for $4.03. It is a little bigger than the original. I also ordered the speedometer cable from Melvins. It...
The Hedmans are reasonably priced but I wish that I had seen that article before installation. I should have done more research. That is a much...
I meant to say 88400s not 84400s. Curious though that some people have had no clearance problems with these headers and the pitman arm. Possibly...
I have the 84400s on a similar setup as yours. 302 with column shifter c4 and p/s. The header itself fit fine and looked as if everything would...
I installed new control arms and springs a few years ago but the 620 1" drop springs left my car sitting[ATTACH] [ATTACH] a little high in the...
Did you go with the billet mounts? If so, the 65-66 or the 67-70?
I used Mustang 620 1" drop front springs on my 73 but as stuman says, the ride height was a little high. I cut one coil off which dropped it about...
Cpp has the front coil-over kit listed for 67-73 Mustangs for $449. Will this kit fit a Maverick with stock control arms?
I installed the adjustable rod on my 73 and it lowered the pedal to where I wanted it to be. I had to experiment with the rod length some. You may...
Good info. I thought one was longer when I removed them but thought the rubber was just stretched. I had a slight leak in one when I installed it...
I did have a slight leak in the return hose where the rubber line was connected to the metal line with a crimp style clamp. The clamp was not...
Installed the new hoses without the tee. Installed new control valve as well. I had actually ordered a rebuilt Bendix unit but was sent a new...
Nice radiator with a decent price but Speedcooling does not have a listing specifically for a Maverick. Is the one you used the one listed for the...
I may try it just to see what happens. I could always change it back if it does not work.
I am replacing the power steering hoses. Has anyone tried teeing the pressure line and return line together to reduce the pressure? I have read...
Good info. I had not considered using a late model one. Thanks for the replies.
Yeah, I should have been more specific. The ones I am referring to are the Chinese made no-name T304 stainless ones. Several speed shops on Ebay...
My car is not equipped with a factory cigarette lighter. I would like to add one for the 12 volt power source. Does the factory harness have a...
He did use a short piece of 2" pipe into 2 1/4" but the arm hit right at the weld. I had to dimple it to get the full movement back on the pitman...
Separate names with a comma.
