I actually picked it up here in town, Payette, Idaho. One hour west of Boise. I just took out the radiator and it needs replaced, good...
Three wheels and all beauty rings are there, the previous owner is going to find the fourth wheel this weekend.
[ATTACH] Heres a picture of the trunk, has new pressure plate/throwout bearing and clutch.
[ATTACH] [ATTACH] Here is the pictures like promised.
Pictures will be posted later. So be patient. Found a 1975 Mav with a 302 three speed on the floor. All parts will be used to build my Comet,...
You can still get the bushing from ford I bought a set of three for 13 bucks i think. They are a pain to install if you dont have a heat gun.
Awesome color. Also, welcome to the madness.
A&W Cruise night September 10th is the cruise starting at 3pm then the 11th is the show and shine. Over 500 cars last yr. Should be 2 mavs and...
I havent junked three but I'm close. Im at two junk mavericks and I am planning on keeping the last two mavs, but they are in really good shape.
I had a Fairmont in HS and the only thing holding the thing together was mud and bailing wire. I had a 80 Camaro and it was okish, it had a 2.8...
You tell what was cool in 1979?
Im 6' 5" nearly 300 lbs. But my seats are far from stock. They are low back buckets from a 64 Mustang and I actually had to scoot them closer to...
Voted for ya, good luck your going to need it, the graham is nice
Will mustang transmission coolant lines work for our car? I am making the swap to a automatic and rather buy prebent stuff then hassle with a...
Honestly I think the rings, freeze plugs and major gaskets where replaced only. The pistons look great where the valve stem seals are intact, but...
It has a melling pump. It was rebuilt 20k ago. Where do I get valve stem seals?
I recently acquired a 250 motor and tranny. I pulled the oil pan to replace the gasket as it had a leak, and then I opened up the valve cover and...
Separate names with a comma.
