Installed a new battery and now I have good spark on all plugs!!!! The old battery turned the starter, but must have had such a low voltage that...
Tom, it's been awhile since you have helped me out!. Thanks. Anyway, based on lessons learned from my first project, I have rewired the...
I fabricated the setup you mentioned (see picture) and it appears to be an ignition problem (I had to use aluminum since my bit was dull, but I'm...
Thanks for the additional ideas. We will try some of this before we pull the front off to check the chain. We have not tried a new coil yet....
I have never posted to the Technical thread before, but this time I'm stumped. My son picked up a real nice 1973 Maverick with a 250, 50,000...
To finish this thread, I got the 3M film installed below the side stripes instead of mud flaps (except for the doors). It is difficult to notice...
Put in a rebuilt 325 pumpkin in place of my loose 380. First time and it took me 5 hours. Spent the rest of the day breaking in the new...
Congratulations! Today was also the first day for me to drive mine fully legally.
My son is also addicted to Mavericks and came home with this today. $1500 with a 6 cylinder and bench seats. 1974 and runs fine, no rust, but a...
My carb is a 600 cfm QuickFuel and it was tuned originally by a racer seeking high HP on his dyno, so I'm sure it's dumping fuel in to up the HP....
Quick Performance out of Iowa. $599 + $40 shipping for a rebuilt open differential (which I want for this once as it will be my highway cruising...
I just ordered a rebuilt 3.25:1 differential pumpkin to replace my 3.80:1 and bring my rpms down closer to stock and improve mpg (>8 mpg I hope)....
I got mine from Seat Belt Planet and am happy, but be sure to specify bench seats. I understand the tunnel seat belt bolt holes are in different...
Again, thanks for all the opinions. So, I'm thinking the clear film covers might be a good idea for the downstream fender area vs mud flaps. Are...
Can anyone recommend a good looking set of mud flaps that fit a 2 door Maverick good?
A big 8 mpg at 60 mph, something has got to change.
I joined this forum over 2 years ago with my 72 Maverick project, and today I can say I am finally done (with a lot of help from everyone on the...
I bought that kit and installed it. Yes it works fine now and is cheap, but it is cheap. I would not count on the relays as being waterproof. I...
Thanks for the picture. I can see why I am being told I should cut more front spring and drop my rear.
Yes. The piece that I would need to grind is the fluid connection between the two dual piston chambers, so you can see why I am not comfortable...
Separate names with a comma.
