I picked up a Maverick factory hood & wired the Taurus fan using the Volvo relay.
It works!!!!!!! Thank you!!!!! :tiphat:
After I got this to work. I didn't like the way it looked. I didn't like all the wires. So I found a Volvo relay in they salvage yard. The wire...
Thanks a lot. I think I have an understanding now. It doesn't seem complicated but maybe it is just a little.
So the yellow wire is the fused wire from the battery. That will be my 8 gauge wire. How thick does the red wire need to be? I guess the red wire...
Ok. So the yellow wire that goes to both 30 pins(60 amp fan fuse) comes from where? Does the red wire that goes to both 86 pin come from the...
My relays don't have 87a pins.
Ok. Yes, that is what in trying to do. Im using to 75a relays. I never read anything about a jumper wire from pin 30 to pin 85. Will 14 gauge be...
I'm having problems wiring my fan. I have 2 separate relays. The toggle has 3 poles (1 top pole, 1 center pole, & 1 lower pole. I wired both...
The new sway bar is alot bigger then the stock one. If you like handling, the new one is better. I also used longer spacers to try to get part of...
It just means, I have a lot of learning ahead of me. Oh but if I was living close to you, I would be over there working with you (for free). So...
I 2nd this!!!!! Top notch work though.
Ken, I have two 3/4 wilwood master cylinders I did not use. I went with a tilton because more bore sizes to choose from. PM me about buying one....
Mines is installed. It went well. Just don't tighten all the bolts up until you get things lined up right. I also had to make the bolt holes...
Maier did develop a panhard bar and frame connectors for a Maverick. I asked him about leaf spring about 2 weeks ago.
You may want to scratch the 1" MC off your list.
My connection point is about 1/2 below the factory whole. The 1" MC works with no grinding. BUT OMG, it is hard to push in. I never felt a clutch...
They other guys are right, I will be putting a 1" master in tomorrow. My trans would not go into gear also.
Ok Thanks, I would like to lower the car a little more.
Chris, what brand drop spindles did you use? I believe I'm going to have a problem with this bar and the strut rod.
Separate names with a comma.
