I used the bulk of the Mark 7 harness in mine and several other pieces of salvage harnesses. Just added the MAF circuits later when I changed to...
Currie will sell them to you. They're not expensive.
There is some really cool stuff on that site. The vintage air controllers are very nice looking too.
[ATTACH] I put mine under the passenger seat riser inside the rocker panel.
Very true. I did this mod sometime around 2004-05 when the replacement motor I bought developed the same bushing squeak after one season. Back to...
Yeah, but your light works. :D
If you use a 3g Ford internally regulated alternator, the "I" circuit performs the same function.
I will see if I can get a pic for you. It's been a few years but if you are using the stock AC system, it's a worthwhile mod. It's a 2001 Taurus...
Make sure the pickup filter/screen is still on the sending unit. That will keep stuff out.
Do you have rust or trash in the tank. Contamination can keep the check valve in the pump open.
Just out of curiosity, what problems are you guys having with the rear sway bar?
Unscrew the boot and leave it in place. Remove the screws from the filler pipe to tail light panel. Lift the boot and use compressed air to blow...
I wired mine to run through a relay on the high setting to reduce the heat load on the switch. As I remember, before I converted my blower to a...
Nice!
I wouldn't sweat it, at least it's fixed!
I agree that function should be a priority with the spoiler, but I don't think it looks bad at all. I can vouch for the hood wanting to fly off of...
That's good advice to anti-sieze the shanks on the wp bolts that go through the cover. :thumbs2:
I used the hole where the OEM fuse box/wiring passed through. I drilled it out round and used a large grommet I had from another harness. I used...
Swapped out my shifter handle and put a T5 shift boot over the gaping hole in the floor. Made the trek to Conyers for the GA mini-meet, had a...
Separate names with a comma.
